Since 1985, TEIN has been developing High performance suspension products. The high technology used in winning the World Rally Championship and Super N1 Endurance Race has now been applied to the streets.
When you are looking for the best in comfort, style, handling and true racing performance, TEIN has all the high quality products for your driving pleasure.
ALL TEIN PRODUCTS PRICES ARE INCLUDING VAT.
TEIN BONNET DAMPERS
Easy to Install and designed to be installed without any modification to the vehicle, All that's needed is some simple tools!
The main body of the damper weights just 200g and the extension that adjust the full-open angle of the BONNET is made of Aluminium, the product is amazingly lightweight.
Meets strict quality standards and has passed one hundred thousand times of Expansion & Contraction Test. In consideration of severe use conditions, as it is placed inside the engine bay, surfaces of each and every part are specially treated for corrosion-proof to stand at least 5 years of use.
All bonnet dampers are vehicle specific and prices do vary
From £82.00
TEIN PILLOWBALL TENSION RODS
Increased steering feel, acceleration and deceleration response, and eliminate horizontal movement of the lower control arms with Tein Pillow-ball Tension Rods. The Adjustable tension rods can be used to adjust caster for increased suspension tuning.
The pillowball mounts replace the OEM rubber mount and significantly reduce any unwanted play.
Constructed of S45C and power coated for a long lasting finish.
Prices vary from vehicle to vehicle.
From £188.00
TEIN STRENGTHENED TIE ROD & END
Strengthened Tie Rod
Improved durability and increased steering wheel cut off angle. This will allow for a higher steering angle at full steering wheel lock. All for a reasonable price.
Superior Durability
Tein tie rods are designed to be stronger than original equipment found on the 240SX (S13 and S14). During hard sport driving, breaking and bending of the tie rods will now be reduced.
Increased Steering Wheel Cut Off Angle
Tein tie rods are adjustable to give you more steering angle at full steering wheel lock. Original equipment tie rods offer limited steering wheel rotation, while Tein tie rods allow for increased rotation.
Excellent Option For Drifting
Tein tie rods can be adjusted for more steering angle for when you counter steer. This will in turn create deeper drift angles.
* Tein tie rod and tie rod ends can NOT be used in combination with the original equipment tie rod and tie rod ends
£70.00
TEIN PERFORMANCE STRUT BRACE
Made from lightweight A6000 Aluminium, these are not only light but exceptionally strong.
Twist and flex that occurs in performance driving is greatly reduced with the use of Tein Performance bars, therefore allowing the driver to obtain the full potential of the suspension.
Features green anodized mounting plates, a polished aluminium bar, and EDFC compatibility.
Front brace is oval in style and rear braces are available in oval and round dependant on Vehicle model.
From £105.00
TEIN EDFC
The EDFC (Electronic Damping Force Controller) when fitted to any of the Tein compatible suspension makes it possible for the driver to control the damping force at the touch of a button while in the drivers seat.
Damping force can be pre set with 3 different memory setting enabling the driver to easily change between hard and soft ride settings for road and track use.
Compatible with:
COMFORT SPORT
SUPER STREET DAMPER (most applications)
MONO FLEX
TYPE FLEX
SUPER DRIFT
SUPER RACING
£280.00
S.TECH SPRINGS
An excellent step towards suspension tuning. offering approximately a 35mm drop over standard for a more aggressive appearance and increased road holding capabilities.
Designed to be used with OEM or OEM replacement shocks. All applications have been UK road tested for a suitable balance in performance and comfort.
Springs are produced with Vanadium (SAE9254V) which is durable and lightweight.
Most applications include silencer rubbers.
Prices vary from vehicle to vehicle.
From £117.00
TEIN BASIC DAMPER
Offers a high quality full coilover system with added performance and comfort at an entry-level price. Each damper is designed exclusively for each individual application, and developed for UK model vehicles.
Uses the same technology and manufacturing processes as the most sophisticated damper systems but at a lower cost.
Shell case has been shortened from OEM length to accommodate more piston travel at lower ride heights.
Prices vary from vehicle to vehicle.
From £470.00
TEIN SUPER STREET DAMPER fits OEM upper mounts
Designed with greater performance in mind to satisfy all your driving demands. This high performance damper can be used for weekend racing and/or daily driving. The discomfort caused by uneven roads or bumps are eliminated on daily street use. For race use, they are hight adjustable and can be set to 16 different levels of damping force, allowing the user to set how stiff or soft the vehicle rides.
Also available with upper mounts.
Prices vary from vehicle to vehicle.
From £587.00
TEIN SUPER STREET DAMPER WITH UPPER MOUNTS
Exactly the same Super Street Damper but comes complete with upper mounts.
Prices vary from vehicle to vehicle.
From £760.00
TEIN SUPER DRIFT
Currently used by many of the top drift driver.
The damping force and spring rates of the new Super Drift Damper were developed directly from competition drifting. Specially designed valving fir increased control, ease of drift control can be realised with total damper tuning, and are for drivers seeking the latest damper technology.
Only available for the most common drift cars.
Some models are special order only.
From £940.00
TEIN COMFORT SPORT
New and specially developed for sophisticated drivers seeking handling gains while maintaining full comfort and quietness. The mono-tube design provides a smooth and luxurious ride feel with added stability for increased control.
Ride hight adjustable
16 levels of damping force adjustment (compression and rebound together)
Rubber upper mount for noise proofing.
Currently only available on selected models.
£955.00
TEIN MONO FLEX
Using a vast motosport history, Tein created the mono-flex, which has been developed for entry level motosport competition and advanced street use.
Mono-tube design for greater damping force adjustment range, full length adjustment system, and 16 way damping force adjustment. (compression and rebound together)
Currently only available for limited models.
Some models special order only.
From £1,080.00
TEIN SUPER RACING
Developed from actual competition Tein have created a fully adjustable damper that can be easily tuned for any track and all weather conditions. Duper racing dampers utilize the full length adjustment, and separate compression and rebound adjustment to produce a superior suspension ready for competition.
Designed and tested for circuit use by advanced drivers who are seeking complete damper tuning capability.
Adjustable camber and castor angles on top mounts and 4 way camber adjustments on lower bracket.
Dual EDFC compatible.
Limited models available, some models are special order only.
From £1,680.00
TEIN FLEX
Tein have used their years of experience in various motorsports to produce a kit that provides the ultimate balance between comfort and performance. The Flex Dampers feature the latest technology for all drivers who are seeking comfort, performance and adjustability. They have incorporated separate spring seat hight and shell case length adjustment, which allows the suspension to retain more stroke and allows for more suspension tuning.
The Flex damper includes pillow ball uper mounts, which increases stearing responce, 16 levels of damping force adjustment, and is compatible with the EDFC for added convenience.
From £865.00
TEIN TYPE HT
Tein's experience in Tarmac racing has led to the development of the HT damper for Gymhkana and Auto-X competitions. The dampers and spring rates have been chosen for optimal grip on tight courses. Separate compression and rebound adjustment (16 x 16) This enables fine tuning to match any driver under all racing conditions.
Type HT is intended for those seeking quick crisp response on all types of surface conditions
From £1,295.00
TEIN TYPE HG
Type HG has been designed for rally and or dirt trial racing. It will satisfy the demands of any road surface with its individual compression/rebound damping force adjustment and ride height adjustment. Utilizes a steel twin tube design for additional durability. In order to prevent aeration that can diminish performance, unique designed free piston adapted in the structure of HG.
Developed from Tein's extensive experience gained in Rally competition and support.
From £1,325.00
TEIN RACING SPRING
Racing springs are for competition use only. The design and material were specially selected for us on track surfaces. They are available in a wide range of aggessive spring rates to suit the needs of any track conditions, and utilize a design and material to reduce weight and give incredible strength.
Use Tein racing springs in conjunction with N1 and racing dampers. Specific bump stroke is required when using these springs.
Prices are per pair of springs
£70.00
TEIN PILLOW BALL UPPERMOUNTS
Pillow ball upper mounts are designed to offer greater feed back for driving sensitivity. Tein use a NWB spherical bearing which replaces the OEM rubber mount, to improve tyre grip and reduce the forces that change wheel alignment. In vehicles with front strut type suspension, Tein have designed an adjustable camber plate to correct the angles in the front of the vehicle.
From £140.00
TEIN ADJUSTABLE WRENCH
Used for adjusting the spring seat and lock on coilover suspension.
Variable arc adjustment.
Designed for spring seat with an outer diamiter of 70 to 90mm and 132mm.
compatible with all threaded type Tein shocks except some N1 dampers.
Has a square hole cut in handle to allow conection to an extension bar for more torque.
Sold in pairs.
£21.00
TEIN SILENCER RUBBERS
Silencer rubbers can be effectively used to eliminate/reduce the noise caused by coil splap (when spring coils hit each other).
The rubber sleeve simply slides over the spring coils to cushion the impact.
Available in 3 sizes to suit varrious applications (large, meduim and small)
